It might come as a bit of a surprise to many consumers that OLED panels for TVs haven’t been updated very often. Almost all OLED TVs today source White OLED panels with White, Red, Green, and Blue sub-pixels from LG displays. White OLED was a revolutionary technology, but since 2016, we have seen only one major upgrade in White OLED TV panels which was marketed as OLED Evo in 2021. But if you are researching before buying an OLED TV, you will run into four different panel types of OLEDs including QD-OLED, OLED WBE, OLED WBC and the latest OLED Ex.

QD-OLED is the latest entrant which will still take some time to mature, while White OLED panels are available in three varieties with OLED Ex being the most advanced offering.  So, what’s the difference between the four?

OLED WBC is the older panel that you get if you buy most of the last-gen OLED TVs like LG C1 or Sony A80J. Some of the 42-inch LG C2 models in 2022 were also found using the WBC panel, which is a clear indication that you might end up with an older WBC panel even for current-gen TVs based on the manufacturer you buy from and the market of purchase. 

With the OLED WBE panel (popularly known as Evo panels), LG made two significant changes that helped increase the brightness by up to 20 per cent over the OLED WBC. 

 Each pixel of a White OLED screen (used on almost all OLED TVs) has a white, red, green, and blue sub-pixel. The OLED material only emits white light which is passed on as it is through the white sub-pixel and the other three colours - red, green, and blue - are achieved using a colour filter layer. The older WBC panels use 2 Blue OLED emitters with a yellow-green and red emitter in between to create white light. For the Evo or WBE panels, Firstly, LG added an extra Green emitter layer between the two Blue OLED emitters (as shown in the image above). This results in brighter and more efficient white light.  

Secondly, the Hydrogen-based OLED material used in the blue emitters has been replaced with deuterium-based OLED material. The change in OLED material to deuterium has a significant impact and enhances the lifetime of OLED manifolds. The panel was first used on the LG G1 OLED TV which also won the Digit Zero1 Award for the Best 4K HDR TV in 2021. 

The OLED Ex panels that were introduced in 2022 have been pitched as a rebranded OLED WBE, but there are a few other notable changes to consider. The most important is that the OLED Ex panels have an additional heat dissipation layer that enables them to go much brighter. This also further reduces the risk of burn-in and reduces image retention on OLED Ex panels. LG has also managed to increase the pixel aperture ratio on the new OLED Ex panels. The Pixel aperture ratio determines how much light a section of the display can emit and a higher pixel aperture ratio implies that pixels can get brighter. LG claims that the OLED Ex panel can get 30% brighter as compared to older WBC panels (not WBE panels). 

LG's new LG G2 which was introduced at CES 2022 is one of the first TVs to debut with the OLED Ex panel. 

OLED Ex panels reduce the spacing between sub-pixels (larger aperture ratio) and have a slightly different green sub-pixel structure. 

QD-OLED displays are currently being manufactured by Samsung Displays. Unlike White OLEDs that you'd get on all other OLED TVs, these panels don't have a white sub-pixel and use quantum dot colour converters instead of regular colour filters for red and green sub-pixels.  This helps avoid the loss of luminance due to colour filters, enabling the panel to produce a much higher brightness and support a much wider colour gamut (more than 90% of BT2020) as compared to the best White OLED panels including OLED Ex.  

Red and Green Quantum dots for the Red and Green sub-pixel on QD-OLED are exited using Blue light and for the Blue sub-pixel, the blue light is passed on as it is. With Quantum dots, there is no loss in energy and the complete brightness can be transmitted. This is why the QD-OLED displays essentially behave as the RGB OLED panels that you'd find on smartphones. 

Only two TVs currently employ a QD-OLED panel, the Sony A95K and Samsung S95B, so it’s hard to say how the overall experience will be. 

Apart from TVs, Dell has launched its 34-inch Alienware QD-OLED gaming monitor that costs $1200. As expected it supports a wider colour gamut and higher peak brightness than any other OLED monitor. On the downside, this panel reportedly has an unconventional sub-pixel arrangement that can lead to fringing for text edges and lacks a polarizer layer on top, which makes the blacks appear grey when viewed in a well-lit room. 

One way to tell the difference between WBC and WBE panels is by measuring their spectral density using a spectroradiometer. The WBE panels are characterized by a narrower blue half-width and clearer separation between the Red and Green spectrum. 

Understandably, consumers don’t have a spectroradiometer handy. So, the next easy way to check is to put a completely white image on your TV. Now, if you see a pink tint off-axis, you most probably have a WBE panel or OLED Ex. WBC panels show a slight cyan tint. 

If you have an OLED TV from LG, you can also check for WBC or WBE panel in the service menu. 

The OLED Ex panel has the same spectral density and the same characteristic pink tint off-centre as the WBE panel, so you will have to check for reviews and manufacturer claims to be sure. 

Peak brightness has been a notable shortcoming of OLED displays, and that’s what LG Displays has been trying to fix with each upgrade. The Ex panel is significantly brighter as compared to the WBE or WBC and that will make a significant difference when you are watching HDR content. At the same time, OLED Ex panels used on mid-range and affordable OLED TVs might not see the brightness gain as manufacturers might choose to instead side with a longer life span of OLED material. 

LG Displays will gradually phase out all other OLED panels except WBE, which is to say that consumers might not have to worry much about what panel they are getting sometime later. OLED Ex panels are currently being manufactured at the Guangzhou fab (GZ) and the older WBC panels are being manufactured at the Paju fab in China. There is no clear timeline for when the Paju fab upgrades to manufacturing WBE panels. 

About Me: Deepak is Assistant Editor at Digit. He is passionate about technology and has been keeping an eye on emerging technology trends for nearly a decade. When he is not working, he likes to read and to spend quality time with his family. Read More

Digit caters to the largest community of tech buyers, users and enthusiasts in India. The all new Digit.in continues the legacy of Thinkdigit.com as one of the largest portals in India committed to technology users and buyers. Digit is also one of the most trusted names when it comes to technology reviews and buying advice and is home to the Digit Test Lab, India's most proficient center for testing and reviewing technology products.

We are about leadership – the 9.9 kind Building a leading media company out of India. And, grooming new leaders for this promising industry.